Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 64 / 128

50
novascale Blade BL465 - Installation and User's Guide
3. Remove the access panel:
Figure 3-23. Removing the access panel
a. Using a screwdriver or a coin, turn each of the screws toward the middle of the
blade server until they are in the unlocked position.
b. While you lift the back of the access panel, slide the panel away from the bezel.
4. Open the microprocessor socket release lever and retainer.
a. Rotate the release lever on the microprocessor socket from its closed and locked
position until it stops in the fully open position (approximately a 135° angle).
b. Rotate the microprocessor retainer on the microprocessor socket from its closed
position until it stops in the fully open position (approximately a 135° angle).
5. If a dust cover is installed over the microprocessor socket, lift the dust cover from the
socket and store it in a safe place.
6. Install the microprocessor in the microprocessor installation tool.