Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 91 / 128

Chapter 4. Configuring the blade server
77
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> --host
<imm_ip>
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>
--host
<imm_ip>
5. Restart the server.
4.6 Using the LSI Logic Configuration Utility program
You can use the LSI Logic Configuration Utility program to perform the following tasks:
• Set the device boot order.
•
Add or remove devices from the bootlist.
• Manage the RAID configuration.
To start the LSI Logic Configuration Utility program, complete the following steps:
Note The LSI controller on your blade server is a UEFI compatible device. It can be configured
through the Setup utility for your blade server (see see Using the Setup Utility on page 66 ).
1. Turn on the blade server, and make sure that the blade server is the owner of the
keyboard, video, and mouse.
2. When the
<<<Press Ctrl-C to start LSI Logic Configuration
Utility>>>
prompt is displayed, press Ctrl-C.
3. Use the arrow keys to select the controller from the list of adapters; then, press Enter.
4. Follow the instructions on the screen to change the settings of the selected items; then,
press Enter. If you select RAID Properties, SAS Topology or Advanced Adapter
Properties, additional screens are displayed.