Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 114 / 128

100
novascale Blade BL465 - Installation and User's Guide
6.2 Resolving conflicts with the IMM LAN over USB interface
Use any of the following actions to resolve LAN over USB conflicts with network
configurations and applications:
• For conflicts with Open MPI, configure the application so it does not attempt to use this
interface.
•
Take down the interface (run ifdown under Linux).
• Remove the device driver (run rmmod under Linux).
•
Disable the LAN over USB interface from the advanced management module Web
interface:
1. Log in to the advanced management module (AMM) Web interface.
2. In the navigation pane, click Blade Configuration under the Blade Tasks heading.
3. Scroll down to the Service Processor LAN over USB interface are on the Blade
Configuration web page. The section lists all blades in the chassis which are
capable of enabling and disabling the LAN over USB interface.
4. Select the check boxes next to the blade or blades that you want to enable or
disable.
5. Click the Disable button to disable the LAN over USB interface on the selected
blades.
6.3 Configuring the LAN over USB interface manually
An IMM must be configured to use the LAN over USB interface. The firmware update
package or Advanced Settings Utility attempt to perform the setup automatically, if needed.
If the automatic setup fails or if you prefer to set up the LAN over USB manually, use one of
the following processes.
For more information about LAN over USB configuration on different operating systems,
see the white paper Transitioning to UEFI and IMM on http://support.bull.com.
6.3.1 Installing the LAN over USB Windows device driver
When you install a Windows operating system, there will be an unknown RNDIS device in
the Device Manager. A Windows INF file is provided, that identifies this device. The
signed version of the INF is included in all of the Windows versions of the IMM, UEFI, and
DSA update packages. Perform the following steps to install
ibm_rndis_server_os.inf
.