Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 66 / 128

52
novascale Blade BL465 - Installation and User's Guide
f. Twist the handle of the installation tool counter clockwise so that it is in the open
position.
g. Using the triangle on the microprocessor to align it with the installation tool, place
the microprocessor on the underside of the tool.
h. Twist the handle of the installation tool clockwise to secure the microprocessor in
the tool.
Note You can pick up or release the microprocessor by twisting the
microprocessor installation tool handle
7. Carefully place the microprocessor into the microprocessor socket, using the alignment
tabs on the microprocessor with the alignment notches in the microprocessor socket as
a guide.
The alignment holes on the tool will not sit flush on the microprocessor bracket screws.
However, the holes can be used as a guide to ensure the proper alignment between
the microprocessor installation tool and the microprocessor bracket.
Attention:
−
Do not press the microprocessor into the socket.
−
Do not touch exposed pins of the microprocessor socket.
−
Make sure that the microprocessor is oriented and aligned correctly in the socket
before you try to close the microprocessor retainer.
−
Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it. If the thermal
material on the microprocessor or heat sink becomes contaminated, contact your
service technician.