Bull Novascale Blade BL465, Инструкция по установке и эксплуатации, Страница: 89 / 128

Chapter 4. Configuring the blade server
75
•
For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
•
For Linux based operating systems:
– cdc_interface.sh
4. After you install ASU, Type the following commands to set the DMI:
asu set SYSTEM_PROD_DATA.SysInfoProdName &ltm/t_model>
[access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum &lts/n>
[access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag &ltasset_tag>
[access_method]
Where:
<m/t_model>
The server machine type and model number. Type mtm xxxxyyy, where xxxx
is the machine type and yyy is the server model number.
<s/n> The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the serial
number.
<asset_method>
The server asset tag number. Type
asset
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
is the asset tag number.
[access_method]
The access method that you select to use from the following methods:
•
Online authenticated LAN access, type the command:
[host &ltimm_internal_ip&gt;] [user
&ltimm_user_id>][password <imm_password>]
Where:
imm_internal_ip
The IMM internal LAN/USB IP address. The default value is
169.254.95.118.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is
PASSW0RD (with a zero, not the letter O).
Note: If you do not specify any of these parameters, ASU will use the default
values. When the default values are used and ASU is unable to access the
IMM using the online authenticated LAN access method, ASU will
automatically use the following unauthenticated KCS access method.
The following commands are examples of using the userid and password
default values and not using the default values:
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoProdName <m/t_model> --
user
<imm_user_id> --password <imm_password>
asu set SYSTEM_PROD_DATA.SYsInfoSerialNum <s/n> --user
<imm_user_id> --password <imm_password>