Brocade Communications Systems Network Advisor 12.3.0, Руководство пользователя

Страница: 908 / 1940

856 Brocade Network Advisor SAN User Manual
53-1003154-01
Rekeying all disk LUNs manually
20
Displaying Universal IDs
In order to delete keys from the key vaults, you need to know the Universal ID (UUID) associated
with the decommissioned disk LUN key IDs. To display the Universal IDs, complete the following
procedure:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 266 on page 694.)
2. Select a switch from the Encryption Center Devices table, then select Switch >
Decommissioned key IDs from the menu task bar.
The Decommissioned Key IDs dialog box displays. (Refer to Figure 402 .)
3. Select the desired decommissioned key IDs from the Decommissioned Key IDs table, then
click Universal ID.
The Universal IDs dialog box displays the universal ID for each selected decommissioned key.
(Refer to
Figure 403 .)
FIGURE 403 Universal IDs dialog box
4. Click Close.
NOTE
You will need to export the decommissioned key ID to the key vault.
Rekeying all disk LUNs manually
The encryption management application allows you to perform a manual rekey operation on all
encrypted primary disk LUNs and all non-replicated disk LUNs hosted on the encryption node that
are in the read-write state.
Manual rekeying of all LUNs might take an extended period of time. The management application
allows manual rekey of no more than 10 LUNs concurrently. If the node has more than 10 LUNs,
additional LUN rekey operations will remain in the pending state until others have finished.
The following conditions must be satisfied for the manual rekey operation to run successfully:
•
The node on which you perform the manual rekey operation must be a member of an
encryption group, and that encryption group must have a key vault configured.
•
The node must be running Fabric OS 7.0.0 or later.
•
The encryption group must be in the converged state.
•
The target container that hosts the LUN must be online.
In addition to providing the ability to launch manual rekey operations, the management application
also enables you to monitor their progress.