manualshive.com logo in svg

Brocade Communications Systems Network Advisor 12.3.0, Руководство пользователя

Поделиться
Скачать
Brocade Communications Systems Network Advisor 12.3.0 Скачать руководство пользователя страница 322

270

Brocade Network Advisor SAN User Manual

53-1003154-01

Dashboard overview

7

Sharing a user-defined dashboard definition

You can share the user-defined dashboard with other users. The changes made in the shared 
dashboard will reflect to all the shared users. When the owner deletes a shared dashboard, it is 
unshared from all the shared users and removed from the Shared Dashboard list.

1. Click the Dashboards expand navigation bar.

2. Select a user-defined dashboard you want to share under My Dashboard, click Options and 

then select Share.

The following message displays: “The selected dashboard will be shared with all users”.

3. Click OK.

The selected user-defined dashboard is shared with all users and is displayed with a shared 
icon.

NOTE

You cannot share default dashboards and shared dashboards.

Unsharing a user-defined dashboard definition

You can unshare a user-defined dashboard from other users. When the owner deletes a shared 
dashboard, it is unshared from all the shared users and removed from the shared dashboard 
section. If the unshared dashboard is the active dashboard, the shared user is notified with a 
warning message and the Product Status and Traffic dashboard becomes the active dashboard.

1. Click the Dashboards expand navigation bar.

2. Select a user-defined dashboard you want to unshare under My Dashboard, click Options, and 

then select Share.

The following message displays: “Are you sure of unsharing the dashboard <

Dashboard 

name

>”.

3. Click OK.

The selected user-defined dashboard is unshared from all the users.

Exporting a user-defined dashboard definition

You can export a user-defined dashboard definition and save in Zip file format. The exported 
dashboard should include the dashboard details, widget definition, and user setting details.

1. Click the Dashboards expand navigation bar.

2. Select a user-defined dashboard you want to share under Dashboard, click Options, and then 

select Export. 

The Export dialog box displays.

3. Browse the path to save the details and click Select. A successfully exported information 

message displays.

Содержание Network Advisor 12.3.0





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды