Brocade Communications Systems Network Advisor 12.3.0, Руководство пользователя

Страница: 59 / 1940

Brocade Network Advisor SAN User Manual 7
53-1003154-01
Management server and client
1
1. Choose one of the following options:
•
On Windows systems, select Start > Programs > Management_Application_Name 12.X.X
> Management_Application_Name Configuration.
•
On UNIX systems, execute
sh Install_Home /bin/configwizard
on the terminal.
2. Click Next on the Welcome screen.
3. Click Yes on the confirmation message.
4. Complete the following steps on the FTP/SCP/SFTP Server screen.
a. Choose one of the following options:
•
Select Built-in FTP/SCP/SFTP Server to configure an internal FTP/SCP/SFTP server
and select one of the following options:
-
Select Built-in FTP Server to configure an internal FTP server
The internal FTP server uses a default account and port 21. You can configure
your own account from the Options dialog box. For instructions, refer to
“Configuring an internal FTP server” on page 126.
-
Select Built-in SCP/SFTP Server to configure an internal SCP/SFTP server
The internal SCP/SFTP server uses a default account and port 22. You can
configure your own account from the Options dialog box. For instructions, refer to
“Configuring an internal SCP or SFTP server” on page 127.
•
Select External FTP/SCP/SFTP Server to configure an external FTP server.
You can configure the external FTP server settings from the Options dialog box. For
instructions, refer to
“Configuring an external FTP, SCP, or SFTP server” on page 128.
b. Click Next.
If port 21 or 22 is busy, a message displays. Click OK to close the message and continue. Once
the Management application is configured make sure port 21 or 2221 is free and restart the
Server to start the FTP/SCP/SFTP service.
NOTE
If you use an FTP/SCP/SFTP Server which is not configured on the same machine as the
Management application, the Firmware Repository feature will not be available.
5. Complete the following steps on the Server IP Configuration screen.
NOTE
If the Management server or client has multiple Network Interface Cards and if any of these
interfaces are not plugged in, you must disable them; otherwise, the following features do not
work properly:
Server impact
•
Configuration wizard (does not display all IP addresses)
•
Trap and Syslog auto registration
•
Report content (Ipconfiguration element does not display all server IP addresses)
•
Network OS configuration backup through FTP
•
Trace dump through FTP
Client impact