Brocade Communications Systems Network Advisor 12.3.0, Руководство пользователя

Страница: 1095 / 1940

Brocade Network Advisor SAN User Manual 1043
53-1003154-01
Port groups
25
Viewing port groups
To view port groups, complete the following steps.
1. Select Configure > Port Groups.
The Port Groups dialog box displays only port groups defined by you.
If a fabric becomes un-monitored, any port groups associated with that fabric do not display in
the Port Groups list. Once the fabric becomes monitored again, the associated port groups
display in the Port Groups list. For more information about monitoring and un-monitoring
fabrics, refer to
“SAN Fabric monitoring” on page 49.
If a fabric is removed from discovery, any port groups associated with that fabric are removed
permanently from the Port Groups dialog box.
If a device is removed from a fabric, then all ports associated with that device are
automatically removed permanently from the port group. If the port group only contains ports
from the removed device, then the port group is removed permanently from the Port Groups
dialog box.
If a fabric or device is added to the topology while the Port Groups dialog box is open, it does
not display in the Group Type - FC Ports tree until you close and reopen the Port Groups dialog
box.
2. Edit the port group, as needed.
To edit a port group, refer to “Editing a port group” on page 1043.
3. Delete the port group, as needed.
To delete a port group, refer to “Deleting a port group” on page 1044.
4. Click OK.
Editing a port group
To edit a port group, complete the following steps.
1. Select Configure > Port Groups.
The Port Groups dialog box displays.
2. Select the port group you want to edit in the Port Groups list.
The information for the selected port group displays in the update information area.
3. Change the name for the port group in the Name field, if necessary.
NOTE
If you change the port group name, it is the same as copying the existing port group with a new
name.
4. Change the description for the port group in the Description field, if necessary.
5. Select one or more ports to add to the group in the Group Type - FC Ports list.
6. Click the right arrow button.
The selected ports display in the Membership List.
7. Select one or more ports to remove from the group in the Membership List.