manualshive.com logo in svg

Brocade Communications Systems Network Advisor 12.3.0, Руководство пользователя

Поделиться
Скачать
Brocade Communications Systems Network Advisor 12.3.0 Скачать руководство пользователя страница 615

Brocade Network Advisor SAN User Manual

563

53-1003154-01

Unassigning a storage port from a storage array

14

4. Click the right arrow.

The storage port is added to the Storage Array.

5. Click OK to save your work and close the Storage Port Mapping dialog box.

If the storage device is part of more than one fabric, a message displays: The selected 

Storage_Name

/

Storage_WWN

 is part of more than one fabric. The port nodes associated with 

the other fabrics will automatically be moved to the storage array. Click OK to close the 
message.

Unassigning a storage port from a storage array

To unassign a storage port from a storage array, complete the following steps.

1. Select a storage port icon in the topology view, then select Discover > Storage Port Mapping.

The Storage Port Mapping dialog box displays.

2. Select the storage port you want to unassign from the Storage Array list. 

NOTE

If the storage device is part of more than one fabric, port nodes associated with the other 
fabrics will automatically be removed from the storage array. 

3. Click the left arrow button.

The selected storage port is removed from the Storage Array list and added to the Storage 
Ports table.

4. Click OK to save your work and close the Storage Port Mapping dialog box.

If the storage device is part of more than one fabric, a message displays: The selected 

Storage_Name

/

Storage_WWN

 is part of more than one fabric. The port nodes associated with 

the other fabrics will automatically be removed from the storage array. Click OK to close the 
message.

Reassigning mapped storage ports

To reassign a storage port, complete the following steps.

1. Select a storage port icon in the topology view, then select Discover > Storage Port Mapping.

The Storage Port Mapping dialog box displays.

2. Select the storage port you want to unassign from the Storage Array list. 

3. Click the left arrow button.

The selected storage port is removed from the Storage Array list and added to the Storage 
Ports table.

4. Make sure the storage port you want to reassign is still selected.

5. Select the storage array to which you want to reassign the storage port in the Storage Array list. 

Содержание Network Advisor 12.3.0





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды