Page 44
Sonic-Pro
Industries, Ltd.
Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
Pipe --> Pipe material
allows you to select
from a list the material from which the pipe
is made. This tells the flowmeter the speed-
of-sound in the pipe wall. The user can also
select
Custom Pipe Material
in the list and
use the
Pipe --> Speed of Sound in Custom
Material
to enter the speed-of-sound directly.
This alternative should be used if the correct
pipe material is not in the list offered.
Liner --> Wall Thickness
allows you to
specify the thickness of any liner inside the
6.3.2
Transducer
Setup
(continued)
pipe. If there is no liner in the pipe, it should be set to zero.
Liner --> Speed of Sound
allows you to specify the speed-of-sound in the liner material.
If there is no liner in the pipe, it is not necessary to set this as it will be ignored.
Fluid --> Fluid Type
allows you to select the type of fluid in the pipe from a list. This tells
the flowmeter the speed-of-sound in the fluid. The user can also select
Custom Fluid
Type
in the list and use the
Fluid --> Speed of Sound in Custom Fluid
to enter the
speed-of-sound directly. This alternative should be used if the correct fluid or
fluid/temperature combination is not in the list offered.
ENTER
Ç
ESC
È
Configuration Set #3
Ê
Pipe
Ê
Pipe Material
Ê
PVDF
Transducer Setup
Ç
Ç
PVC/CPVC
Stainless Steel 302/303
Stainless Steel 304
Stainless Steel 304L
È
È
Stainless Steel 316
Pipe Outside Diameter
allows you to specify the outside diameter of the pipe.
Pipe --> Wall Thickness
allows you to specify the thickness of the pipe wall. From this
and the outside diameter, the flowmeter calculates the inside diameter and hence the
cross-sectional area of the pipe. This is critical to converting the measured velocity of the
fluid to a volumetric flow.
