RS232
USB
ETHERNET
RS485
PROCESS CONTROL RELAYS
(THREE EACH) 10A 250V AC
R1
R2
R3
COM
NC
NO
COM
NC
NO
COM
NC
NO
TRANSDUCER
INPUTS
Tx 1
Tx 2
RED (+)
RED (+)
BLK (-)
BLK (-)
GRN
GRN
mA
Hz
POS (+)
NEG (-)
GRN
SIGNAL
OUTPUTS
NEG (-)
POS (+)
DC
AC
DC (+)
DC (-)
GRN
AC LINE
AC NTRL
POWER INPUT
SD CARD
DATA LOG
(REMOVE)
MODE SWITCH
T
D
INDICATOR
LIGHTS
COMMUNICATIONS
CONNECTOR PANEL
WARNING
INPUT POWER
LIMITS
AC INPUT
96VAC - 264VAC
50/60 Hz
DC INPUT
15 to 30 VDC
SETUP BUTTON
1A 250V (5 x 20)
FUSE
CAUTION
risk of electric shock
RED (+)
BLK (-)
GRN
Page 10
Sonic-Pro
Industries, Ltd.
Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
This section presents an overview of the function of the Sonic-Pro Flowmeter. It is
intended to orient the reader to the various states in which the flowmeter operates, what
is accomplished in each state and how the flowmeter moves from state to state.
Subsequent sections will elaborate on the most important states and introduce
capabilities not mentioned here.
STANDARD MODEL FEATURES
?
Data logging to a standard SD Card.
?
4-20 mA output signal
?
0-1000 Hz digital frequency output signal
?
LED status indicator lights
DISPLAY AND USER ACCESS MODEL DISTINCTIONS
?
Model S1
does not provide a display or user access to any programming functions.
?
Model S2
?
Model S3
OPTIONAL COMMUNICATIONS PACKAGE WITH CUSTOM PC SOFTWARE
Communications Package
that includes
circuitry, connector panel and custom PC software. When
software, any model can perform the
functions
described in this manual including program editing and data logging downloads directly
into the PC.
OPTIONAL PROCESS CONTROL RELAY BOARD
provides a basic display and no user access to any programming functions.
provides a full featured display and full user access all programming
functions.
Any Sonic-Pro model can be equipped with a
connected to a computer
running the Sonic-Pro
Model S3
Any Sonic-Pro model can be equipped with a
Process Control Relay Package
that
includes three independently programmable 10 amp relays. However, relay programming
requires the Model S3 programming features or the Communications Software package
to function. Models S1 and S2 cannot access the relay functions unless connected to the
communications Software.
WIRING COMPARTMENT
The wiring access door
on the front of the flowmeter enclosure only
must be
removed to access the wiring terminal blocks, motherboard controls (a setup button and
the measurement mode switch) and to view the status LEDs.
There are no user
serviceable items inside the rear enclosure.
2.0 Overview of Flowmeter Operation
CIRCUIT BOARD LAYOUT
INDICATOR LIGHTS
INPUT POWER (green)
FAULT CONDITION (red)
METER STATUS (yellow)
FRONT COVER PLATE REMOVED
SETUP BUTTON (white)
INDICATOR LIGHTS
2.1
Standard
Model Features
and Options
2.2
Wiring
Compartment
FUSE
