manualshive.com logo in svg

Blue-White ProSeries Sonic-Pro S1, Инструкция по установке и эксплуатации

Поделиться
Скачать
Blue-White ProSeries Sonic-Pro S1 Скачать руководство пользователя страница 28

Page 28

Sonic-Pro

Industries, Ltd.

Industries, Ltd.

ProSeries

by Blue-White Ind.

TM

An acoustic coupling material must be placed between the transducer and the pipe 
surface at the point where the sound waves enter the pipe.. Without this material, the 
ultrasonic sound waves will not penetrate into the pipe. The Sonic-Pro meter package 
includes two different gasket materials for this purpose.

The blue gasket (part number 76001-417) should be used for permanent installations. 
This gasket will be damaged be repeated installations.

The white gasket (part number 90006-610) should be used for non-permenant 
installations such as in portable applications. This gasket will withstand multiple 
installations.

Dow Corning Silicone Seal #111 (not supplied) my be used in place of the gaskets if 
desired.

1) Peel off the thin paper backing from the blue gasket and place the gasket on the 
transducer completely covering the waveguide. 
2) Remove the thick plastic backing from the gasket before positioning the transducer on 
the pipe.

The white gasket does not include backing tape. Position the gasket on the transducer 
completely covering the entire bottom surface of the transducer. 

TRANSDUCER

WHITE

GASKET

WHITE GASKET PLACED

ON TRANSDUCER

WHITE GASKET INSTALLATION

4.9
Transducer
Acoustic
Mounting
Gaskets

TRANSDUCER

BLUE

GASKET

BLUE GASKET PLACED

ON TRANSDUCER

BLUE GASKET INSTALLATION

TRANSDUCER

BOTTOM VIEW

TRANSDUCER

BOTTOM VIEW

Содержание ProSeries Sonic-Pro S1





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды