Page 40
Sonic-Pro
Industries, Ltd.
Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
On selecting this action, you are prompted to supply a Master Password.
The master
password is “empty” when shipped from the factory. The first time user may
enter any master password.
Once entered, this master password can be used to enter
ANY configuration, as if no other passwords are present.
6.2.3.2
Master
Password
Once a
Master Password
has been
entered, upon selecting this action, you will
be
If this is done incorrectly, the
flowmeter returns to the
Setup Root
Menu
. If it is done correctly, you are given
the choices of changing the
Master
Password
or returning to the
Setup Root
Menu.
If you elect to change the
Master
Password,
you must enter it twice. You will
receive confirmation of the change or, if the
two entries were not the same, the password
will not change and, in either case you are
prompted to supply the
Master
Password
.
returned to the
Setup Root Menu
. Whether the
Master Password
is changed or not,
on return to the
Setup Root Menu
, you will not need to enter passwords for the
duration of the current
Setup Mode
session.
Wherever a password is required, the
Master Password
will be accepted. Therefore,
knowing the
Master Password
lets you do anything. In particular, you can overwrite
“forgotten” passwords. Knowing just the password of a single
Configuration Set
lets
you edit, activate or delete only that set.
ENTER
Ç
ESC
Setup Root Menu
Global Configuration
Ê
Master Password
12345
Ê
Ç
Ç
On selecting this action, you are able to
change date and time settings. Each digit
can be set in the same way as for numerical
data, see section 6.3.1.1 below.
The flowmeter uses date and time
information to time stamp log entries, see
section 7.6 below. There is no explicit means
to set the time zone or daylight savings
time. The clock must be manually set
forwards or backwards as appropriate.
The meter includes a coin cell battery to
maintain the date and time settings in the event of a power failure (Type CR1632, 3V
16mm 126mAh). The battery should last for years of operation. The battery is located on
the main circuit board. Contact the factory if the battery must be replaced.
6.2.3.3
Setting the
Date and
Time
ENTER
Ç
ESC
Setup Root Menu
Global Configuration
Ê
Date and Time
2008/01/01 00:18:03
Ê
Ç
Ç
Save changes before escaping from the
Global Configuration menu. If the
ESC
soft
button is pressed repeatedly to go back up in
a menu until the top level is reached and is
then pressed one time more without saving
the changes, the flowmeter “escapes” from
the
Setup Mode
directly to the
Startup
State
and from there to the
Run Mode
, as
described in section 2.7 above.
6.2.3.4
Saving
Changes
ENTER
Ç
ESC
È
Setup Root Menu
Global Configuration
Ê
Communications Settings
Master Password
Date and Time
Save Changes
