BioCare Medical VALENT Скачать руководство пользователя | Manualshive

Страница: 9 / 116

background image

1

Chapter 1: Introduction

Intended Use

This manual is intended for use by clinical, research, industry and reference laboratory personnel who use the VALENT Automated Staining
Platform to perform immunohistochemistry (IHC) staining. This manual describes how to operate the VALENT using the VALENT Software
and will assume users have been trained and have a basic understanding of IHC procedures.

About the VALENT Automated Staining Platform

The VALENT is Biocare Medical’s highest-capacity, fully-automated, open-architecture slide stainer designed to perform high-quality
and consistent IHC staining in lieu of manual staining methods without the variability. However, the VALENT retains the ability to
integrate established manual staining protocols with an automated platform for ease of use with minimal optimization. The VALENT
incorporates on-board deparaffinization and heat-induced antigen retrieval, while expanding capacity to 48 slides and shortening turn-
around-time compared with other auto-stainers.

Limitation of Use

The optimum antibody dilution and protocol for a specific application can vary due to different factors. These may include, but are
not limited to: tissue fixation, antigen retrieval method, incubation times, tissue section thickness and detection kit used. Due to the
superior sensitivity of Biocare Medical’s reagents, the recommended incubation times and titers listed in product data sheets are not
applicable to other detection systems as results may vary and will have to be optimized by the user. The datasheet recommendations
and protocols are based on exclusive use of Biocare Medical products. Ultimately, it is the responsibility of the investigator to determine
optimal staining protocol conditions. The clinical interpretation of any positive or negative staining should be evaluated within the
context of clinical presentation, morphology and other histopathological criteria by a qualified pathologist. The clinical interpretation
of any positive or negative staining should be complemented by morphological studies using proper positive and negative internal and
external controls as well as other diagnostic tests.

VALENT Specifications

Slide capacity

48

Independent slide trays

4 trays, 12 slides per tray

Refrigerated reagent & mixing vial rack

44 positions, 20mL vials;
Temperature range: room temperature to 10°C below room temperature

Antigen retrieval temperature range

Room temperature to 98°C at sea level

Reagent dispensing volume

300µL

Probe dispense capacity

300µL -14.4mL (48 slides x 300µL/slide)

DePar dispense volume per slide

1mL

Bulk reagent carboys

4

Waste carboys

2

Waste separation

Separates hazardous and non-hazardous

Unit control

One instrument per computer

Electrical requirements

Power input: 1800W (1800VA) / Power source: 100-120 VAC, 50/60Hz

The VALENT cannot be used without the VALENT Cart. Power supplied to the VALENT
from the VALENT Cart may reach 3600W@ 120V.

The use of a dedicated circuit capable of delivering a minimum of 1850W continuously
with less than 5% voltage sag is required for the instrument�

Instrument dimensions

40”W X 24”D X 26”H / 102cm W X 61cm D X 66cm H

Instrument weight

245lbs / 111.1 kg

«
...
7
8
9
10
11
...
»

Содержание VALENT





















































































































Отзывы:

Нет отзывов

Похожие инструкции для VALENT

Бренд: B&K Страницы: 8

Бренд: Odom Страницы: 19

Бренд: MacDon Страницы: 30

Бренд: GE Страницы: 43

Бренд: GE Страницы: 37

Бренд: GE Страницы: 210

Бренд: GE Страницы: 160

Бренд: GE Страницы: 146

Бренд: GE Страницы: 6

Бренд: GE Страницы: 27

Бренд: GE Страницы: 4

Бренд: idiag Страницы: 10

Бренд: Bandit Страницы: 136

Versaflo S Series

Бренд: 3M Страницы: 11

DBI Sala EXOFIT

Бренд: 3M Страницы: 32

Бренд: 3M Страницы: 8

Бренд: Accurate Bio-Medical Technology Страницы: 35

Бренд: Danelec Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды