Installing the device
Installation instructions
59
Replacing the lower section and closing it
Ø
Grip the lower section with both hands.
Ø
Guide the lower section into the device from below
until the guide grooves of the flap are equal on the
guide pins of the device.
Ø
Press the lower section rearwards into the device
(1.).
Ø
Pull the lower section downwards (2.) until it clicks
into place.
Ø
Make sure that the lower section is fitted correctly.
The lower section is correctly fitted if the flap can be
moved freely.
Close the lower section.
Ø
Close the lower section by pushing it upwards until
the two magnetic fasteners can be heard to click
together.
When the power level is switched on, a weak
stream of air will be blown from the air duct in
the lower area of the device to the front air
intake. This air circulation is essential for
optimal operation of the device.
Ø
Ensure that the air duct is not closed.
Connect the power supply
DANGER
Lethal electric shock caused by
improper connection.
Ø
Only allow work on the power supply
to be carried out by qualified, trained
electricians adhering to the country-
specific regulations and standards
(e.g. in Germany DIN 57100 / VDE
0100, part 701).