Cleaning
26
Operating instructions
Close the lower section.
Ø
Close the lower section by pushing it upwards until
the two magnetic fasteners can be heard to click
together.
Cleaning the controls
Ø
Clean the controls surface with a lint-free, slightly
damp cloth (e.g. a microfibre cloth).
Ø
Dry the controls with a lint-free, soft cloth.
Cleaning when heavily soiled
If the device is heavily soiled, you must remove the
lower section and the capillary trap. These parts can be
easily removed, they are replaced after cleaning for
further use.
Proceed as follows to clean the device at heavy soiling
levels:
Remove the lower section
Ø
Turn off the device.
Ø
Open the lower section by pulling the flap on the
rounded edge downwards.
Ø
Use a soft, damp cloth for cleaning.
Ø
Wipe off the parts.
Ø
Grasp the lower section on its sides with both hands
when it is hanging down perpendicularly.
Ø
Lift the lower section about 2 cm (1.).
Ø
Loosen the lower section by pulling it forwards (2.).
Ø
Remove the lower section.
