Maintenance
Operating instructions
31
Insert the filter
To make sure that the filters are installed
correctly, a guide is installed on the filter
seating.
Only for recirculated air mode:
Ø
Insert the filter into the device from the top.
Only in hybrid operation:
Ø
Insert the filter into the device from the top.
Valid for all filters:
The filter is inserted correctly when the bottom edge of
the filter is parallel to the top edge of the fan's housing
and the gap is approximately 5 mm wide.
Ø
Make sure that the filter is inserted correctly.
The filter is installed.
If the filter is not correctly fitted, proceed as follows:
Ø
Remove the filter.
Ø
Replace the filter again.
Only in hybrid operation:
Ø
Push the exhaust pipe onto the filter collar.
Ø
Seal the transition between the exhaust pipe and the
guide with the help of sealing tape.
Ø
Ensure that the exhaust pipe is correctly fitted.
Ø
Fit the screens or other attached modifications.
.