Cleaning
Operating instructions
27
Remove the capillary trap
Ø
Grasp the capillary trap on its sides with both hands.
Ø
Pull the capillary trap downwards (1).
Ø
Remove the capillary trap (2.).
Clean the parts
ATTENTION
Damage to the lower section by
improper cleaning.
Ø
Clean the lower section e.g. with a
damp cloth.
Ø
Clean the lower section e.g. with a damp cloth.
Ø
Clean the upper section as described in the
"Cleaning with normal soiling" section, e.g. with a
damp cloth.
Ø
Clean the capillary trap e.g. in the dish washer.
Ø
Clean the surfaces of the mounting slot for the
capillary trap e.g. with a damp cloth.
Ø
Clean the edges above the recess for the capillary
trap e.g. with a damp cloth.
After cleaning replace the cleaned and dry parts as
follows:
Insert the capillary trap
Ø
Make sure that the capillary trap is completely dry
before re-inserting.
Ø
Ensure that the words "Front" on the capillary trap
are pointing to the front side of the device.
Ø
Insert the capillary trap into the device by guiding it
with both hands into the mounting slot (1.)
Ø
Push the capillary trap upwards into place (2.).
The capillary trap snaps into place with an audible
sound.
Replacing the lower section and closing it
Ø
Grip the lower section with both hands.
Ø
Guide the lower section into the device from below
until the guide grooves of the flap are equal on the
guide pins of the device.
