Remove the parts for installation
46
Installation instructions
Check the delivery
Ø
Makes sure that all the parts are complete as
described in the following section.
Ø
Check the delivered parts for damage.
Ø
If any parts are damaged or missing, contact your
berbel dealer or customer services.
Built-in hood BEH 60 GL scope of delivery
Built-in hood BEH 60 GL
Right bracket
Left bracket
These installation instructions
Six screws (cross-head) 4.5 x 16 mm
Two screws (cross-head) 4.5 x 25 mm
Optional accessories
Only for hybrid mode:
Hybrid filter BHF 150 +
Only for recirculated air mode:
Recirculated air filter BUF 150 +
Wall box BMK F/L
Remove the parts for installation
Prior to installation, there are individual components
that must be removed or dismantled to be able to
safely install the device.
Ø
Perform the following steps sequentially.
Ø
Place the device on its back on a flat, clean and
protected surface.
The following illustrations show a device that
is already installed. They are only as a guide
for the installer. The device must lie on its
back for the following steps, and the actions
are to be implemented according to the
perspective.