Berbel BEH 60 GL Скачать руководство пользователя страница 22

Страница: 22 / 64

Operating

Operating instructions

All the operating symbols light up brightly for five
seconds. The settings are now saved.
The configuration mode is turned off.

The device is ready for use again.

Optional: turning the effect lighting setting on and off

As delivered, the effect lighting function is turned off.

To turn on the optional effect lighting function, proceed
as follows:

Turn the configuration mode on.

Briefly touch the touch pad



(power level 1).

The symbol for the optional effect lighting function is
dimly lit and the function is activated.

Turn the configuration mode off.

Turning the extraction mode/recirculated air mode
setting on and off

As delivered, the extraction mode/recirculated air mode
switching function is turned off.

In order to turn the extraction mode/recirculated air
mode switching function

, proceed as follows:

Turn the configuration mode on.

Briefly touch the touch pad



(power level 2).

The symbol of the touch pad



(power level 2) is

brightly lit and the symbol for the extraction
mode/recirculated air mode function is dimly lit.
The function is activated.

Turn the configuration mode off.

In order to turn the extraction mode/recirculated air
mode switching function

off

, proceed as follows:

Turn the configuration mode on.

Briefly touch the touch pad



(power level 2).

The symbol of the touch pad



(power level 2) is

brightly lit and the symbol for the extraction
mode/recirculated air mode function is turned off.
The function is deactivated.

Turn the configuration mode off.

Содержание BEH 60 GL

































































Результаты поиска

Содержание BEH 60 GL

Отзывы:

Похожие инструкции для BEH 60 GL

Бренды по названию

Популярные бренды

Berbel BEH 60 GL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание BEH 60 GL

Отзывы:

Похожие инструкции для BEH 60 GL

Бренды по названию

Популярные бренды