Installing the device
Installation instructions
49
Safety distances are observed
The following illustrations show the way the
possible operating modes work. The devices
used are shown as symbols. The illustrations
are meant to serve as a guide. The device
displayed may differ in shape from your
device.
The following statutory minimum separation distances
must be observed:
Description
Size
Y
0 mm
X
For gas hobs:
at least 650 mm.
Recommended distance:
550 mm
Install the brackets
For this work-step you need a large Phillips
screwdriver.
The brackets provided on delivery are screwed onto
the inner walls of the cabinet to the sides.
Ø
Protect all the surfaces of your working area from
damage, e.g. using thick cardboard or foam.
The metal levers are aligned downwards and point
towards the front side of the cabinet.
Ø
Fit the bracket marked "Right" to the right inner wall
of the cabinet.
Ø
Ensure that the rear edge of the bracket is flush
against the rear wall of the cabinet.
Ø
Ensure that the bottom edge of the bracket is flush
with the bottom edge of the base of the cabinet.
Ø
Fasten the bracket with the cross-head screws
included in delivery (3.5 x 16 mm) (2.).
Ø
Tighten up the cross-head screws (3.).
Ø
Ensure that the bracket is firmly mounted in the
correct installation position.
Ø
Repeat this process with the left-hand bracket.
