Berbel BEH 60 GL Скачать руководство пользователя страница 45

Страница: 45 / 64

Preparation for installation

Installation instructions

Tools and equipment needed

For installation you need the following tools, materials
and documents:



Cross-head screwdriver



SW7 spanner



Thick cardboard e.g. to protect the cooking hob

and the work surface



These installation instructions



Jigsaw

Unpacking

CAUTION

Risk of injury from broken glass.

Wear protective gloves.

Unpack the device carefully.

Do not touch broken glass.

ATTENTION

Damage to the surfaces from improper
unpacking.

Cut the packing tape and straps with
scissors.

Do not cut into the protective
cardboard packaging.

ATTENTION

Scratched surfaces from metallic,
sharp-edged objects, e.g. belt buckles
or tools during transport.

Transport the device without any
contact to objects that could scratch
the device.

Remove the packing foil and the cardboard
packaging.

If present, cut off the holding strap with scissors.

Cut the packing tape using scissors.

Take the loose parts out of the packaging.

CAUTION

Risk of injury from the heavy extractor
hood falling.

Lift the device only with two persons.

Protect the surfaces of the working area, e.g. using
thick cardboard.

Remove the parts from the packaging.

Place the pars on a level, protected surface.

Содержание BEH 60 GL

































































Результаты поиска

Содержание BEH 60 GL

Отзывы:

Похожие инструкции для BEH 60 GL

Бренды по названию

Популярные бренды

Berbel BEH 60 GL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание BEH 60 GL

Отзывы:

Похожие инструкции для BEH 60 GL

Бренды по названию

Популярные бренды