Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 63 / 74

- 60 -
6.10 Clear Instruction (CL)
Clear instruction (CL) clears data of code tag with "0".
Instruction code
Instruction : CL Code : 4C43H
(1) Operation timing
The following chart shows operating timing.
ON
External signal OFF
ON
M1 OFF
Writing parameter
ON
Sequence program OFF TOP
Request of executing ON
ID instruction M340 (RY4) OFF
Finish of ON
ID instruction M212 (RX4) OFF
ON
ID-BUSY M211(RX3) OFF
Communication code tag ON
and read/write head OFF
ON
Error detection M213 (RX5) OFF
(2) Explanation of operating
The following explains the timimg operation.
Sequencer CPU Processor
ON external relay M1, set instruction code,
with TO instruction then ON RY4.
ON RX3 Read/write Code
Head tag
ON finish identification instruction relay RX4.
Execute clear
OFF RY4
OFF RX3, RX4
<Attention>
It executes instructions for the number of retry times and occurs error in the case of
code tag is not present when clear instruction (CL) is executed.
Clear instruction CL clears all data with "0". To clear data with specified data, use batch
( )
writing instruction FI .
( )
The area that set write protection is not cleared.
Write protection error does not occurred.