Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 43 / 74

- 40 -
(2) Initial setting by user
< > Attention
Writing initial setting to remote register should be done only once when the processor is standing.
Initial setting is accepted only when the processor is ON request of initial data RX78 .
( )
To change initial setting, change the program and turn on power again, or reset processor.
(a) In using ACPU
M9036
FROM H0 H680 K4M100 K4 Reading other data link condition
FROM H0 H0E0 K4M200 K8 Reading input (RX)
M320 M100
RST M328 User setting
(RX78) (link) (RY0)
RST M329 Setting processing unit to word
(RY1)
RST M330 Select number of using channel to 2 channel
(RY2)
MOVP K5 D100 Specify retry count (5 times)
MOVP K200 D101 Specify inzone detecting time
(2 sec.) CH1
MOVP K50 D102 Specify interval for executing
sequence instruction (5 sec.)
MOVP K5 D108 Specify retry count (5 times)
MOVP K200 D109 Specify inzone detecting time
(2 sec.) CH2
MOVP K50 D110 Specify interval for executing
sequence instruction (5 sec.)
TO H0 H1E0 D100 K16 Writing
SET M448 ON finish processing initial data
(RY78)
SET M449 ON require setting initial data
M205 (RY79)
FROMP H0 H2E1 R0 K1 Reading error code of setting dip switch
M320(RX78) (RX5)
RST M448 OFF finish processing initial data
M321(RX79) (RY78)
RST M449 OFF require setting initial data
M9036 (RY79)
TO H0 H160 K4M328 K8 Writing output (RY)