Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 45 / 74

- 42 -
(C) In using QCPU (Q mode)
Setting of automatic refresh parameter, program is the same procedure as initial setting of factory
setting (refer to 6.6 (1)(c)).
Display for initial setting is as follows.
Input format decimal
Executing Operating Condition of executing procedure Contents of executing
flag Condition Executing Writing Device Writing
condition Device
device device number data
number condition
User setting
Execute Set new RX 78 ON RY 00 OFF
Word unit
Execute Same as prev. set RX 78 ON RY 01 OFF
Using 2 channels
Execute Same as prev. set RX 78 ON RY 02 OFF
Retry count (CH1)
Execute Same as prev. set RX 78 ON RWw 00 5
Inzone detecting time
Execute Same as prev. set RX 78 ON RWw 01 200
Executing sequence instruction
Execute Same as prev. set RX 78 ON RWw 02 50
Execute Same as prev. set RX 78 ON RWw 08 5
Execute Same as prev. set RX 78 ON RWw 09 200
Execute Same as prev. set RX 78 ON RWw 0A 50
Execute Same as prev. set RX 78 ON RY 78 ON
Execute Same as prev. set RX 78 ON RY 79 ON
Execute Set new RX 78 OFF RY 78 OFF
Execute Set new RX 79 ON RY 79 OFF
Execute Set new
Execute Set new
Execute Set new
Execute Set new