Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 13 / 74

- 10 -
(2) Remote output (RY)
Device No.
CH1 CH2 Signals Contents
RYn0 Selecting initial Specify processing unit or number of channel to use with "user
setting setting" or "factory setting". By selecting "user setting", processing
unit, number of using channel could be selected by user.
OFF : User setting
ON : Factory setting
(Setting contents : word unit, both of CH1,CH2 are used)
RYn1 Selecting Specify processing unit of processing data. Setting is effective
processing when select initial setting (RYn0) is OFF (user setting).
unit It is only word unit setting.
OFF : word unit
ON : unused (to set ON, it will be word unit.)
RYn2 Selecting number Specify number of channel to use. Setting is effective when
of channel selecting initial setting (RYn0) is OFF (user setting).
OFF : both of CH1,CH2 are used
ON : only CH1 is used
RYn4 RYnC Require executing Executes instruction when require executing identification
ID instruction instruction is ON.
RYn5 RYnD Unused Unused
RYn6 RYnE Unused Unused
RYn7 RYnF Finish divided data Refer to RXn7, RXnF.
RY(n+1)0 Unused Unused
...
RY(n+6)F
RY(n+7)8 Flag for finishing to Refer to RX(n+7)8, RX(n+7)9.
process initial data
RY(n+7)9 Flag for requiring to
set initial data