Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 35 / 74

- 32 -
6.2 List of Instructions and Commands
The following instructions and commands can be executed with the processor BIS C-489 . ( )
Instructions/ Instruction code Process Reference
Functions
Commands ASCII Hex.
Reading RD 4452H Reads data from code tag. 6.7.1
Reading
CR 5243H Compares data to check.
Sequence AR 5241H Executes reading in sequence until code tag gets into 6.7.2
Reading SR 5253H communication area, and executes reading when code tag got
into communication
After that, compares data to check.
Writing WD 4457H Writes data to code tag. 6.8.1
Writing
CW 5743H Compares data to check.
Sequence AW 5741H Executes writing in sequence until code tag gets into 6.8.2
Writing SW 5753H communication area, and executes writing when code tag got
into communication
After that, compares data to check.
Batch FI 4946H Writes specified data to specified area in code tag 6.8.3
writing simultaneously.
Check Comparing CM 4D43H Compares data of processor with data in code tag. 6.9
Clearance Clearing CL 4C43H Clears specified area in code tag with "0" 6.10
Command Sequence Cancels sequence instruction compulsively. 6.11
instruction
Cancellation
Error
Executes error cancelling process. 6.12
cancellation Clearing error LED, resetting error detected signal,
(
) Clearing executing result store area in remote resister
Life Reading Reads life "expectancy information" of code tag that written in
expectancy life LR 524CH code tag. 6.13
expectancy
of code tag