Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 28 / 74

- 25 -
Parts Description
LED PW Light on : Power ON
indication Light off : Power OFF
RUN Light on : Operating normally
Light off : Cut off power 24V DC,or WDT error
L RUN Light on : Communicating normally
Light off : Cut off communicating ( time over error )
SD Light on while sending data
RD Light on while receiving data
L ERR. Light on : Communicating data error (CRC error), station number,
setting switch for transmitting rate of data link error
Blinking fixed interval : when setting switch for station number or
transmitting rate of data link is changed while power
is supplied.
Blinking unsettled interval : terminal resistor is not connected,
or unit or cable for CC-Link is influenced by noise.
Light off : Communicating normally
SD Light on : while sending read/write head CH1
RD Light on : while receiving read/write head CH1
CH1
ID- Light on : wrong condition read/write head CH1
ERR. when setting switch for block no. is out of set range
( ) Blinking : when setting switch for block no. is changed in set range
Light off : normal condition
IN-Z Light on : when detects inzone
Light off : cable breakage of read/write head
SD Light on : while sending read/write head CH2
RD Light on : while receiving read/write head CH2
CH2
ID- Light on : wrong condition read/write head CH2
ERR. when setting switch for block no. is out of set range
( )
Blinking : when setting switch for block no. is changed in set range
Light off : normal condition
IN-Z Light on : when detects inzone
Light off : cable breakage of read/write head
Reset RST Reset switch for hardware
< >
Operation after resetting
Initialize remote register
Request of processing initial data will be ON
Renewal setting data of each setting switch
Connector for read/write head Connector for read/write head (for CH1, CH2)
Terminal block for power Terminal block for power supply and data link
supply and data link