Balluff BIS C-489-1 KBT02 Series, Техническое руководство, Страница: 14 / 74

- 11 -
3.3 Allocation of Remote Register
Allocation remote resistor of processor (BIS C-489) is explained in this chapter.
The remote resistor is set initial digit when power is supplied or sequencer CPU is reset.
3.3.1 List of Remote Resistor
Remote resistor of processor (BIS C-489) is indicated in the following table.
Using Initial Direction of Address
receiving Reference channel Contents digit
CH1 CH2
Writing area Specifying area for instruction 3.3.2 (1) RWwm RWwm+8 code ―――
master station Specifying area for first address 3.3.2 (2)
RWwm+1 RWwm+9 ―――
3.3.2 (3)
↓ RWwm+2 RWwm+A ――― Specifying area for processing number
Processor Specifying area for writing data 1 Using both
RWwm+3 RWwm+B
... 3.3.2 (4) ... ... ―――
CH1&CH2 Specifying area for writing data 5 RWwm+7 RWwm+F
3.3.2 (5) RWrn RWrn+8 ――― Storing area for instruction code result
Processor
3.3.2 (6)
RWrn+1 RWrn+9 ―――
Storing area for executing result
↓ RWrn+2 RWrn+A ――― ―――
Unused
Reading area Storing area for reading data 1
RWrn+3 RWrn+B
... ... 3.3.2 (7) ... ―――
master station Storing area for reading data 5 RWrn+7 RWrn+F
RWwm ――― ―――
Unavailable
Writing area
3.3.2 (1)
RWwm+1 ―――
Specifying area for instruction code
master station
Specifying area for first address 3.3.2 (2)
RWwm+2 ―――
3.3.2 (3) ↓ RWwm+3 ――― Specifying area for processing number
Processor Specifying area for writing data 1 RWwm+4
... 3.3.2 (4) Using ... ―――
Specifying area for writing data 12
RWwm+F
only CH1
RWrn ――― ―――
Unavailable
Processor 3.3.2 (5)
RWrn+1 ――― Storing area for instruction code result
3.3.2 (6) RWrn+2 ――― Storing area for executing result
↓
RWrn+3 ――― ――― Unused
Reading area
Storing area for reading data 1 RWrn+4
master station ... 3.3.2 (7) ...
―――
Storing area for reading data 12
RWrn+F
3.3.2 (8) RWwm ――― Specifying area for retry count
Writing area
3.3.2 (9) RWwm+1 ―――
Specifying area for inzone detecting time
master station
3.3.2 (10) Initial Specifying area for interval of
RWwm+2 ―――
setting executing sequence instruction
↓
RWwm+3 ―――
Unavailable
Processor
RWwm+4
――― ――― ... Unavailable
RWwm+F
m,n : Address that was allocated to master station with station number setting
<Attention>
The remote register that indicated "Unavailable" should not be used by the user because
they are used in the system.
If unavailable remote resistor is used by the user, normal operation would not be warranted.