Baker Hughes Apollo 3, Руководство пользователя

Страница: 254 / 277

Copyright 2020 Baker Hughes Company. All rights reserved. Page 254 of 277
• The pump in the system is not in the engineering database.
• The user desires to use the pump curve for the actual pump being used instead of the reference curve.
The Custom Pump spreadsheet is available on the Support Central Drives & Controls Product Support site
(
http://supportcentral.ge.com/products/sup_products.asp?prod_id=264489 ).
Every pump is tested to verify its operation to the catalog curve (within an acceptable limit). A pump curve
for that specific pump is created as part of the test. The pump curve information is included on the pump test
sheet provided with each pump. A customer or field engineer can use the Custom Pump spreadsheet to
generate a pump curve file for their pump using the test data. An example is shown in
Figure 210: Pump
Test Results for TE-5500 S/N 203F2210P, page 253 :
Figure 210: Pump Test Results for TE-5500 S/N 203F2210P
The steps for creating a Custom Pump file for use with Apollo are listed below:
1. Open the CustomPump.xls spreadsheet
2. Click the
“Create Custom Pump” button
3. On the resulting dialog, click
the “Enter Pump Test Data” button
4. Enter the test data. See Figure 211: Custom Pump Data Entry, page 254 .