- 17 -
Audio keypads A500Plus enabling
(user)
The audio enabling of the individual keypads is activated as follows:
- Enter
user code
with “
Master
” feature and access menu
1
on the keypad to be enabled
- Scroll the programming steps up to “
A500 Settings
” step
- Access the menu and adjust the “
Audio Volume
” on one of the possible settings (Mute - Low - Medium - High) using the key (
CLR
).
Note:
“Mute” deactivates the audio of the keypad for any communication (events and zone state).
Audio “ZONES STATE” and keypads “EVENTS” enabling
(user)
The audio ZONES STATE enabling of the individual keypads is activated as follows:
- Enter
user code
with “
Master
” feature and access menu
1
on the keypad to be enabled
- Scroll the programming steps up to “
A500 Settings
” step
- Access the menu and set the
“Audio Zones State”/ “Audio OC state” / ”Audio events”
on (YES/NO) using the key (
CLR
)
Audio enabling to the keypads
(installer)
The enabling of the communications to the keypads is obtained:
- By setting the various events to be communicated on “YES” in
“Audio A500Plus”
menu.
- By setting the various sectors to be communicated on “YES” in
“Audio A500Plus”
menu.
- in menu “Keypads > A500 Settings >
RTC A500
” set to “YES” to enable the vocal management of the system directly with the keypad
- in menu “Keypads > A500 Settings >
Audio events
set to “YES” to activate the communications of the enabled events
- in menu “Keypads > A500 Settings >
Audio zones state
” set to “YES” to activate the communications of the associated
inputs
.
- in menu “Keypads > A500 Settings >
Audio OC state
” set to “YES” to activate the communications of the associated
output OC
Display options and rear-lighting
(user)
It is possible to vary the contrast, the intensity of the LEDS and the rear-lighting; to vary these options work as follows:
- Enter
user code
with “
Master
” feature and access menu 1 on the keypad to be enabled
- Scroll the programming steps up to “
A500 Settings
” step
- Access the menu and scroll downwards to entry “Reduc. Contrast - LED intens. red. - Rear-lighting”.
-
Contrast Reduction:
By setting “Yes” the contrast of the display is reduced
-
LED Intensity Reduction
: By setting “Yes” the brightness of the LEDS of the keypad is reduced
-
Rear-lighting (%):
Set the value (from 10% to 100%) of the rear-lighting intensity of the display and of the keypad.
RTC enabling on A600Plus keypad
(user)
It is possible to activate the RTC directly on the A600Plus keypad with the same functions and use modalities of the RTC with telephone connection.
- Enter
user code
and press
7
; (“RTCA500”: must be enabled in the “user profile”
- Insert the commands described on the user manual for RTC, press (
ESC
) to exit
Interruption of vocal repetitions
(user)
It is possible to interrupt the cycle of the vocal repetitions of the keypads:
- Press key (
3
) of the keypad if in the user menu.
- Press key (
3
) followed by
ENT
if outside the user menu.
