AvL Proprietary and Confidential
Content is Subject to Change without Notice
Page
101
of
195
Reflector Mount Elevation Switch Position – 6.2.3
Reflector Mount Polarization Position – 6.2.3
Reflector Mount Switch Elevation Offset – 6.2.3
Roll Inc Offset – 6.3.4
RSL Com Port – 6.3.1
RSL Com Port Settings – 6.3.1
RSL Gradient Sample Time – 6.3.1
RSL Minimum Lock Threshold – 6.3.1
RSL Noise Sample Time – 6.3.1
RSL1 Noise Floor – 6.3.1
RSL1 Scale Factor – 6.3.1
Safe Turn Maximum Elevation – 6.2.1
Safe Turn Maximum Elevation Reflector Mounted – 6.2.1
Secondary Heading Source – 6.3.2
Show Stow Warning – 6.2.2
Signal Wait Time – 6.3.4
Step Mode Sample Delay – 6.3.6
Step Mode Wobble Correction – 6.3.6
Time Service Maximum GPS Drift – 6.3.5
Time Source – 6.3.5
Use Fast Home – 6.3.3
Use Manual GPS on Fail - 6.3.3
Use Manual Tilt – 6.7.3
User Azimuth CCW Limit – 6.2.1
User Azimuth CW Limit – 6.2.1
User Elevation Down stow Limit – 6.2.1
User Elevation Up Limit – 6.2.1
6.1.2 Target Parameters
Target Parameters relate directly to the scanning & acquisition of the target satellite.
Circular Polarization Left Hand Position – 6.4.4
Circular Polarization Position – 6.4.4
Circular Polarization Right Hand Position – 6.4.4
Coarse Peak Signal Source 1 – 6.4.2
Coarse Peak Signal Source 2 – 6.4.2
Coarse Peak Signal Source 3 – 6.4.2
Current Satellite – 6.4.1
Current Satellite Longitude – 6.4.1
Current Satellite NORAD ID – 6.4.1
Current Satellite Polarization – 6.4.1
Current Satellite TLE Line 1 – 6.4.1
Current Satellite TLE Line 2 – 6.4.1
Disable Scans – 6.4.3
Fine Peak Signal Source 1 – 6.4.2
Fine Peak Signal Source 2 – 6.4.2
