Original Operating Manual 1-2013
28
Assembly
Unpacking
Remove the packing materials carefully from the Pedelec base. Check whether all parts and
documents are enclosed and nothing was lost or damaged during transit.
IMPORTANT: The initial installation should be performed or tested by a dealer/ specialist. The
manufacturer is only liable for the delivery status of the bike. Remove the battery before any
work on the bike. All modifications, extensions or repairs remain in your responsibility.
Incorrect installation or a lack of testing, can jeopardize driver’s safety and others, especially on
roads and streets!
Handlebar mounting
1.
First remove the plastic cover from steerer or stem (fig. 1)
2.
Slide in the steerer/stem into the fork tube holder (fig. 2, 3)
3.
Attach the headset with the appropriate screw (see figure 4). In case of a different set
type, the lateral fixing screws at the end must be tightened additionally. Make sure that
the stem is in parallel to the wheel rim and the handlebar in the right angle to it
4.
During the first tightening of the headset screw, the orientation of the handlebar is still
adjustable. At the end the hex screw is to be tightened, so that the handlebar is
completely fixed, but at the same the front wheel should swing smoothly (otherwise
repeat the procedure)
fig. 1
fig. 2
fig. 3
Handelbar and stem (examples)
fig. 4
