Original Operating Manual 1-2013
33
Turn the battery off and unclose the lock with the key (23), before you remove it. Then, pull the
battery out of the holder (19).
Note:
The grip and the housing of the carrier battery should not be used to lift the whole bike. In
case of an incorrect battery adjustment on the bar or a misfit of the plug contacts, the rear
battery lifting of the bike could cause damages.
Insert and release the operating computer
(Intuvia)
To attach the operating computer Intuvia (3), set the portable part to the front of the bracket/
holder (4), press it on the raster groove (15) and slide it along the guide rails as far down, until it
clicks into place.
Intuvia operating computer and handlebar holder
For removing Intuvia, revise the procedure. A slightly pressing on the front of the raster holder
dissolves the portable part and it can be pushed out. Without operating computer, the drive is
no longer activated and unauthorized parties can not abuse the eBike.
But it is also possible, to leave the operating computer on the holder and to secure it against
removal. Unscrew the holder (4) from the handlebar and put the operating computer onto the
bracket. Screw in the blocking screw (16) from below, until the operating computer is locked.
Then mount the holder together with the operating computer back onto the bar.
