Original Operating Manual 1-2013
64
Example:
Speed sensor at rear wheel
IMPORTANT: The signal from the speed sensor is not only needed to display the travel speed,
but also for verification in the engine control. A faulty speed signal would change the system
state to default and the Hybrid bikes will lose the full e-power support.
Note:
Do not try to manipulate the speed sensor (similar to car speedometer). The present
production version does not allow any change technically. If you alter the legally prescribed e-
drive support limit of 25 km/ h (Pedelec) you violate the rules and come to liability.
Lighting and signalling
The more eBikes are on the streets and are driving longer and faster than conventional bikes,
the more it is important for the safety of all bikers, to have professional lights and signaling on
board.
ave. Hybrid bikes of the Touring, Sports and Mobility series have the top line of lighting
equipment on board, with super bright LED light (30 lux), daylight function, dimmed and
parking lights as well as light bars at the rear for safety.
Front lighting
B&M Lumotec Lyt T senso plus
B&M Lumotec Lyt N plus
B&M Lumotec Lyt Classic N plus
Rear lighting
B&M Toplight Line plus
B&M Seculite plus
B&M Toplight Flat S
B&M Toplight plus
