110
Figure 11-2
Sample Wi-Fi Connection Screen
To connect the VCI device with the tablet via Wi-Fi
1. Power on the tablet.
2. Connect the 26-pin end of the data cable to the VCI's vehicle data connector.
3. Connect the 16-pin end of the data cable to the vehicle data link connector (DLC).
4. Tap
VCI Manager
on the MaxiSys Job Menu of the tablet.
5. Select
Wi-Fi
from the connection mode list.
6. Tap the Wi-Fi Toggle to turn it
ON
. Tap
Refresh
at the top-right corner. The
device will start to search for available units.
7. Depending on the VCI type you use, the device name may appear as Maxi
suffixed with a serial number. Select the appropriate device for connection.
8. When connection is established, the connection status reads
“Connected”.
9. The VCI button on the system Navigation Bar at the bottom of the screen
displays a green Wi-Fi icon, indicating the tablet is connected to the VCI device.
10. To disconnect the device, tap the connected device again.
11. Tap
Back
on the top-left to return to the MaxiSys Job Menu.
NOTE
To ensure a fast connection, perform this operation in a steady network environment.