49
indicate the alarm point. The threshold lines are shown in different colors to differentiate
them from the parameter waveforms.
3.
Function Buttons
The operations of all available function buttons on the Live Data screen are described
below:
Cancel All
— tap to cancel all selected parameters. Up to 50 parameters can be
selected at one time.
Show Selected/Show All
— tap to switch between the two options; one displays the
selected parameters, the other displays all the available items.
Graph Merge
— tap this button to merge selected data graphs (for Waveform Graph
Mode only). This function is very useful when comparing different parameters.
NOTE
This mode supports the merging of 2 to 5 parameters from different graphs. Only quantitative
parameters are supported.
To merge selected data graphs
1) Select parameters to be merged.
2) Tap the
Graph Merge
button at the bottom of the Live Data screen.
a) This mode only supports parameters that can be represented digitally. If
non-digital parameters are selected, a message will display advising the
user that the selected parameters are not supported in this mode and to
select 2 to 5 digital parameters. Tap
Got It
button to return to the previous
screen and select supported parameters.
b) When unsupported parameters are selected, a message will appear
advising the user to selected only parameters that are supported. A
message will also appear if more than 5 parameters have been selected.
Please select 2 to 5 of the supported parameters and tap
OK
button to
merge.
3) Tap
Cancel Merging
button at the bottom of the Live Data screen to cancel
merge.
To Top
— moves a selected data item to the top of the list.
Setting
— tap this button to set recording duration. Five options are available: 5
seconds, 15 seconds, 30 seconds, 60 seconds and 90 seconds.
To set live data record duration
1. Tap
Setting
button at the bottom of the Live Data screen.
2. Tap the
>
button to the right of
Recording time after trigger
bar and select a
time length.
