ASTRO WM-3209, Инструкция по эксплуатации, Страница: 94 / 254

82
Concerning the status mode display screen
• When Single (HD or SD signals) is set for the input channel
What a status screen may look like is shown below using an example when SDI A1, SDI
B1 or COMPOSITE is set as the input channel.
• Diagram showing HEX (hexadecimal notation) display
SMPL Y PB PR SMPL Y PB PR
EAV 1920 3FF 3FF 1950 040 200
1921 000 000 1951 040 200
1922 000 000 1952 040 200
1923 2D8 2D8 1953 040 200
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
1946 040 200 1976 040 200
1947 040 200 1977 040 200
1948 040 200 1978 040 200
1949 040 200 1979 040 200
The data of the sample number in the currently selected line is shown at the top left of the screen,
and the data of each sample is displayed in sequence.
When the EAV or SAV data is detected, [EAV] or [SAV] is displayed on the left of the sample
numbers.
The data in the DEC and OCT formats are displayed in the same way as for HEX.
• Diagram showing BIN (binary notation) display
SMPL Y PB PR
EAV 1920 1111 1111 11 1111 1111 11
1921 0000 0000 00 0000 0000 00
1922 0000 0000 00 0000 0000 00
1923 1011 0110 00 1011 0110 00
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
1946 0001 0000 00 1000 0000 00
1947 0001 0000 00 1000 0000 00
1948 0001 0000 00 1000 0000 00
1949 0001 0000 00 1000 0000 00
The data of the sample number in the currently selected line is shown at the top of the screen, and the
data of each sample is displayed in sequence.
When the EAV or SAV data is detected, [EAV] or [SAV] is displayed on the left of the sample numbers.