ASTRO WM-3209, Инструкция по эксплуатации, Страница: 133 / 254

Chapter 4 Description of Each Mode
121
When AREA is Selected
Setting Item Description Default
Up/Down Moves the display area up or down one. CENTER
Left/Right Moves the display area left or right one. None
Area
CENTER Moves the display area to the center. None
• Adjusting the Overlap Level
Turn the Adjustment Dial to adjust the Overlap Level.
The overlap of the Another_CH image is emphasized if the level is decreased, and the
overlap of the Owner_CH image is emphasized if it is increased.
Ratios of 0 through 16 are available for Level.
If Level is 0, the text for Another_CH is highlighted. If the Level is 16, the text for
Owner_CH is highlighted.
Each time the adjustment time is pressed, overlap level 16 (Owner CH) is switched to
overlap level 0 (Another CH) or vice versa. For details, refer to "5.18 3D image parallax
check."
･
Adjusting the L&R level
The Owner CH and Another CH images are displayed simultaneously by splitting the
screen vertically into left and right parts.
Turn the adjustment dial, and adjust the Overlap Level.
When the Level setting is reduced, the ratio taken up by the screen for the Another CH
image increases; when it is increased, the ratio taken up by the screen for the Owner CH
image increases.
Ratios 0 to 16 are available for Level.
When 0 is set for Level, the Another CH characters are highlighted; when 16 is set for
Level, the Owner CH characters are highlighted.
Each time the adjustment dial is pressed, the setting is switched to overlap level 16
(Owner CH), overlap level 8 (vertical division at the center into two equal parts) or overlap
level 0 (Another CH) in this order.
For details, refer to "5.19 Concerning 3D image alignment."
･
Adjusting the T&B level
The Owner CH and Another CH images are displayed simultaneously by splitting the
screen horizontally into top and bottom parts.
Turn the adjustment dial, and adjust the Overlap Level.
When the Level setting is reduced, the ratio taken up by the screen for the Another CH
image increases; when it is increased, the ratio taken up by the screen for the Owner CH
image increases.
Ratios 0 to 16 are available for Level.
When 0 is set for Level, the Another CH characters are highlighted; when 16 is set for
Level, the Owner CH characters are highlighted.
Each time the adjustment dial is pressed, the setting is switched to overlap level 16
(Owner CH), overlap level 8 (horizontal division at the center into two equal parts) or
overlap level 0 (Another CH) in this order.
For details, refer to "5.19 Concerning 3D image alignment."