ASTRO WM-3209, Инструкция по эксплуатации, Страница: 36 / 254

24
* Characters are confirmed one at a time.
* The currently selected character is highlighted.
Each time the character changes, the character in the ASCII table will also move
to match that character.
* Up to 10 characters consisting of upper or lowercase alphabetic characters,
numeric characters, and/or basic symbols can be displayed.
* Kanji can be displayed for IDs only in EXTERNAL mode.
• Supplement
Each channel has an associated ID.
3.4.4 COMPARE
Select another channel (Another_CH) for comparisons in Compare mode or Phase Compare mode.
Setting items are as follows.
Setting Item Description Default
Compare Pic (*1) Another_CH:
Compares with the input signal.
3G HD2X:
3G-SDI Level B signal is split and displayed as
data stream1 and 2.
Memory1 through 4:
Compares with saved memory data.
CB-100%/CB-75%:
Compares with 100% color bars and 75% color
bars. Another_CH
Another_CH (*1) SDI_A: Compares with the SDI_A input
signal.
SDI_B: Compares with the SDI_B input
signal.
Composite: Compares with the composite input
signal.
When SDI_A1
is selected:
SDI_B
When SDI_B1
is selected:
SDI_A
When
Composite is
selected: SDI_A
Save Memory(*2, *3) Saves the input channel image to flash memory. None
Clear Memory(*2, *3) Memory1 through 4:
Clears selected memory data. None
Own H Mirror Enable/disable the inverse function of Owner CH
signal horizontally. OFF
Own V Mirror Enable/disable the inverse function of Owner CH
signal vertically. OFF
Ano H Mirror Enable/disable the inverse function of Another
CH signal horizontally. OFF
Ano V Mirror
Enable/disable the inverse function of Another
CH signal vertically. OFF
Compare 3D Enable/disable the synchronization of Compared
signal frame. ON
Disp1 Size Customize the Disp 1’s display size of the
display difference simulation of Display 1
compare mode . 100 inch
Disp1 Aspect 4:3 : Set aspect ratio of Display 1 to 4:3.
16:9 : Set aspect ratio of Display 1 to 16:9.
2.35:1
：
Set aspect ratio of Display 1 to 2.35:1.
4:3