ASTRO WM-3209, Инструкция по эксплуатации, Страница: 37 / 254

Chapter 3 Method of Operation
25
Disp2 Size Customize the Disp 2’s display size of the
display difference simulation of Display 1
compare mode. 100 inch
Disp2 Aspect 4:3 : Set aspect ratio of Display 2 to 4:3.
16:9 : Set aspect ratio of Display 2 to 16:9.
2.35:1
： Set aspect ratio of Display 2 to 2.35:1.
4:3
Unit cm:
Set unit of display difference simulation to cm .
inch:
Set unit of display difference simulation to inch. cm
*1: The monitor's specifications are such that when the selected signal has a format which differs from
the format of the signal input before this item was set, the menu screen may be exited but images in
the new format will still be drawn stably.
*2: The settings of these items cannot be changed when the Flash Protect function is ON. (For details
on the Flash Protect function, refer to "5.17 Concerning the Flash Protect function.")
*3: Error count and the elapsed time stop while data is being saved in the memory or the memory is
being cleared, but since priority is given to operations involving the memory, the drawing of the
images based on the data concerned is stopped temporarily. The actual error count and elapsed
time recording still continues even while the memory is being accessed. After the data has been
saved in the memory or the memory has been cleared, updating on a real-time basis is selected
again.