ASTRO WM-3209, Инструкция по эксплуатации, Страница: 164 / 254

152
4.16.1 Compare Mode 5 Horizontal Display
This mode displays the Owner CH and Another CH images arranged horizontally.
This mode displays vector waveforms superimposed on top of each other below the images.
Functions Assigned to GAIN
Setting Item Description Default
GAIN ×1: Displays the vector waveform at standard
size.
×5: Displays the vector waveform at five times
standard size.
Val: Adjusts the multiplication factor for vector
waveform from 0.03 to 7.97. (*1)
×1
*1: This setting can be adjusted in integral widths (1.00 → 2.00 → … → 7.00 → 1.00 → …) using the
Adjustment Dial.
• Supplement
The GAIN function is active in Vector Mode, Multimode 1, Multimode 3 and 4, and
Compare Mode 4 and 5.
For details, see “4.5 Vector Mode”, "4.10 Multimode", "4.15 Compare Mode 4" and "4.16
Compare Mode 5."
Functions Assigned to ScanArea
Setting Item Description Default
Level 1 Level 2
Select the scan
area of the
image from
FULL, Div9 or
Div25. FULL: Scan the entire image.
Div9: Divide the image into nine parts and
scan one of those areas.
Div25: Divide the image into 25 parts and scan
one of those areas.
FULL
UP*2 Move the scan area up by one. None
Down*2 Move the scan area down by one. None
Left*2 Move the scan area to the left by one. None
SCANAREA
Right*2 Move the scan area to the right by one. None
*2: This setting is enabled when Div9 or Div25 is selected.
For details, see “5.8 Scan Area.”
• Supplement
The ScanArea function is reflected in the vector mode and compare modes 4 and 5.
For details, refer to “4.5 Vector,” “4.15 Compare Mode 4” and “4.16 Compare Mode 5.”