ASTRO WM-3209, Инструкция по эксплуатации, Страница: 85 / 254

Chapter 4 Description of Each Mode
73
4.4 Waveform Mode
Enter waveform mode by setting the mode switch to WAVE.
The unit displays the input signal waveform using a variety of drawing methods.
Function Assigned to DISPLAY
Setting Item Description Default
Level 1 Level 2
Parade/Overlay/
Composite:
Selects the
method of
displaying the
waveform. 3Parade: Displays an arrangement of
three waveforms.
4Parade: Displays an arrangement of
four waveforms.
Overlay: Displays three superimposed
waveforms.
Composite: Displays the dummy
composite waveforms
(NoSetup).
Composite7.5IRE: No waveforms can be
selected when COMPOSITE
or COMPOSITE 7.5IRE has
been selected.
3Parade
Y/Pb/Pr/None
(G/B/R/None):
(*1)
Selects whether
to display the
waveform. Select for each waveform to be displayed. Y(G): ON
Pb(B): ON
Pr(R): ON
DISPLAY
Waveform: (*2)
Sets the
waveforms to
be displayed
and their display
order. YPbPr: Arranges waveforms in the order Y, Pb,
and Pr from the left.
GBR: Arranges waveforms in the order G, B,
and R from the left.
RGB: Arranges waveforms in the order R, G,
and B from the left.
YPbPr
*1: When 4Parade is selected, all waveforms can be selected and Y, G, B, and R are all turned ON.
All of which cannot be selected when COMPOSITE or COMPOSITE 7.5IRE has been selected.
*2: YGBR or YRGB can be selected when 4Parade is selected.
It cannot be selected when COMPOSITE or COMPOSITE 7.5IRE has been selected.
• Supplement
The DISPLAY function is active in Waveform Mode, Multimode 2, and Compare Mode 2.
For details, see “4.4 Waveform Mode”, “4.10.2 Multimode 2” and “4.13 Compare Mode 2."
For details on the dummy composite waveform display, refer to “5.12 Concerning the
Dummy Composite Waveform Display.”