ASTRO WM-3209, Инструкция по эксплуатации, Страница: 34 / 254

22
• Hierarchical MENU Screen Image
• Setting Method
1. Align the cursor with INPUT_CHANNEL and press the Adjustment Dial.
2. When the cursor is aligned with the item whose setting is to be changed and the
adjustment dial is pressed, the setting is changed.
3.4.3 ID SETTING
These setting items are used to set the IDs of the input channels (SDI_A1 to SDI_B1, Composite, dual
link) as described in the table below.
Setting Item Description Default
DISPLAY ON: Displays the channel IDs.
OFF: Hides the display of the channel IDs. ON
ID Select (*1)
Internal: Displays the ID set with Internal ID Edit.
External: Inputs an ID from an external source
using RS485 communications. (*2)
Internal
On Picture ENABLE: Displays the IDs in all the modes.
DISABLE: Hides the display of the IDs in the
following modes.
PICTURE2, MULTI2, MULTI3,
COMPARE1_H, COMPARE2_H,
COMPARE3_H, COMPARE4_H,
COMPARE5_H
DISABLE
Internal ID Edit (*3) Sets the ID to be displayed during Internal mode. SDI IN A1: SDI_A1
SDI IN B1: SDI_B1
COMPOSITE IN:
COMPOSITE
DUAL LINK1 IN: DUAL
LINK1
External ID (*1) Represents the Unit NO. when inputting an ID
using RS485 communications. 1 (*4)
*1: Operation and selection of this setting item are possible only for the WM-3209-L model. However, no
changes can be made when the Flash Protect function is ON. (For details on the Flash Protect
function, refer to "5.17 Concerning the Flash Protect function.")
*2: Operation and selection of this setting are possible only for the WM-3209-L model.
*3: Up to 10 characters of text can be used to represent each input channel.
Characters that can be used in Internal mode include: upper and lowercase alphabetic characters,
numeric characters, and basic symbols.
*4: The settings are automatically saved when they are selected.
SDI_A ENABLE
DI_B DISABLE
COMPOSITE ENABLE
NTSC_SETUP 7.5IRE
DUAL LINK ENABLE
10/12bit 10bit
Sampling Sel 4:4:4
Color Space YpbPr
Auto CS Cnv ON
INPUT_CHANNEL
4:2:2
4:4:4