ASTRO WM-3209, Инструкция по эксплуатации, Страница: 195 / 254

Chapter 5 Specifications
183
5.10 Concerning the Selection of Input Channels
During External Control (contact power supply)
Refer to the table below when selecting the input channels during external control (contact
power supply).
Select the input channel in the left column of the table using a combination of the setting
items.
The setting items are used to assign external control (contact power supply). For details, refer
to "3.4.14 REMOTE ASSIGN."
Setting item
Input channel
Dual/Single SDI/VBS SDI A/B
Dual Link Dual (*) (*)
VBS Single VBS (*)
SDI A1 Single SDI SDI A
SDI B1 Single SDI SDI B
*: denotes an item which has no effect on the input channel selection.
The priority sequence of the input channels for setting item (1) is Dual/Single → SDI/VBS →
SDI_A/SDI_B.
• Assign the Dual/Single setting for setting item (1) to switch between Dual Link and
another input channel.
• Assign the SDI/VBS setting for setting item (1) to switch between VBS and SDI A1 to
SDI B1.
• Assign the SDIA/SDIB setting for setting item (1) to switch between SDIA1 and
SDIB1.