ASTRO WM-3209, Инструкция по эксплуатации, Страница: 168 / 254

156
Functions Assigned to Display CH and Display Vector
Setting Item Description Default
Display CH (*3) Owner: Displays the vector waveform for
Owner CH when 1Vector is
selected.
Another CH: Displays the Another CH waveform
when 1Vector is selected.
Owner CH
Display Vector 1Wave: Displays the vector waveform for either
Owner CH or Another CH.
2Wave: Displays the vector waveforms for
Owner CH and Another CH
superimposed on top of each other.
2Vector
*3: Function indicators are only displayed when Display Vector is set to 1Vector.
• Supplement
The Display CH and Display Wave (Display Vector) functions are active in Compare
Mode 3 and Compare Mode 5.
For details, see “4.14 Compare Mode 3” and "4.16 Compare Mode 5."
Functions Assigned to LineSelect
Setting Item Description Default
LineSelect (*4) Switches line select ON/OFF.
When line select is ON, increment and
decrement the line by turning the Adjustment
Dial. Select the line by pressing the Adjustment
Dial. OFF
*4: When using LineSelect ON/OFF, the line is linked in all modes.
The field can only be switched when using an interlaced or segment frame format.
Interpolation between measurement points is only performed when ×1 is selected.
Line select is automatically turned OFF when Div9 or Div25 is selected as the SCAN AREA.
• Function Indicator Contents
Level 2:
F1: GAIN = ×1/×5/Val
F2: SCAN AREA
F3: Display CH = Owner/Another
F4: Diplay Vector = 1Vector/2Vector
F5: Lineselect
Level 3:
F1: Up
F2: Down
F3: Left
F4: Right
F5: FULL/Div9/Div25
Exits this level of the menu
(Switch)
ESC