ASTRO WM-3209, Инструкция по эксплуатации, Страница: 16 / 254

4
Table 2.1 Front Panel Part Names
Number Name Description
(1) POWER Switch/LED Turns power ON/OFF.
When POWER is ON: Lights green
During KEY LOCK: Lights orange
(2) Adjustment dial Adjusts and selects setting values
(3) Mode switch Switches the mode. The mode is switched as follows.
PRESET, PICTURE1, PICTURE2, WAVEFORM, VECTOR, STATUS,
AUDIO, PHASE, ANC, MULTI, OPTION, COMPARE1, COMPARE2,
COMPARE3, COMPARE4, COMPARE5
(4) Headphone jack Outputs audio. ( φ 35 mm) (*1)
(5) Adjustment dial Adjusts the liquid crystal backlight (*2)
(6) Liquid crystal display Displays video images.
(7) INPUT switch Switches the input channel.
(8) COLOR switch Displays a screen for setting color information. Pressing the same button
again exits the color setup screen.
Items that can be set include: Information, Marker, Cursor, Scale, Waveform,
Vector, Audio Vector and Status.
(9) FREEZE Freezes the on-screen image.
(10) MENU switch Displays the MENU screen. Pressing the same button again exits the color
setup screen.
Pressing and holding the switch locks the front switch.
Repressing and holding the switch unlocks the front switch.
In accordance with the main unit function settings (*3), the settings are
automatically saved in BOOT of the memory at the same time as key lock is
initiated.
(11) ESC Exits the setup screen.
If pressed while saving or clearing picture memory, that operation is
canceled.
(12) U1 User-assigned switch
(13) U 2 User-assigned switch
(14) U 3 User-assigned switch
(15) U 4 User-assigned switch
(16) PRESET switch Saves preset data and displays a call-up screen. Pressing the same button
again exits the color setup screen.
(17) F1 switch The function assigned to this switch varies depending on the mode.
(18) F2 switch The function assigned to this switch varies depending on the mode.
(19) F3 switch The function assigned to this switch varies depending on the mode.
(20) F4 switch The function assigned to this switch varies depending on the mode.
(21) F5 switch The function assigned to this switch varies depending on the mode.
*1: If a embedded audio is multiplexed with the SDI signal, an audio signal is output.
*2: A ripple voltage of approximately 300Hz may arise in the DC power input when brightness is lowered using the
backlight adjustment dial.
*3: For further details, refer to chapter 3 "3.3.6 MENU Switch."