ASTRO WM-3209, Инструкция по эксплуатации, Страница: 100 / 254

88
• When Dual has been selected for the input channel
What a status screen may look like is shown below using an example when Dual Link1 or
Dual Link2 is set as the input channel.
• Example of HEX (hexadecimal) display
The Link A signal data is displayed on the left of the screen, and the Link B signal data
is displayed on the right.
When the EAV or SAV data is detected, [SAV] or [EAV] is displayed on the left of the
sample number.
The data in the DEC and OCT formats are displayed in the same way as for HEX.
• Example of BIN (binary) display
SMPL Y PB PR
EAV 1920 A 1111 1111 11 1111 1111 11
B 1111 1111 11 1111 1111 11
1921 A 0000 0000 00 0000 0000 00
B 0000 0000 00 0000 0000 00
1922 A 0000 0000 00 0000 0000 00
B 0000 0000 00 0000 0000 00
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
・ ・ ・ ・
1933 A 0001 0000 00 1000 0000 00
B 1000 0000 00 1000 0000 00
1934 A 0001 0000 00 1000 0000 00
B 1000 0000 00 1000 0000 00
The Link A signal data is displayed on the higher line for the sample numbers, and the
Link B signal data is displayed on the lower line.
When the EAV or SAV data is detected, [SAV] or [EAV] is displayed on the left of the
sample number.
SMPL Y PB PR SMPL Y PB PR
EAV 1920 3FF 3FF EAV 1920 3FF 3FF
1921 000 000 1921 000 000
1922 000 000 1922 000 000
1923 2D8 2D8 1923 2D8 2D8
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
・ ・ ・ ・ ・ ・ ・ ・
1946 040 200 1946 200 200
1947 040 200 1947 200 200
1948 040 200 1948 200 200
1949 040 200 1949 200 200
Link A Link B