ASTRO WM-3209 Скачать руководство пользователя страница 141 | Manualshive

Страница: 141 / 254

ASTRO WM-3209 Скачать руководство пользователя страница 141

Chapter 4 Description of Each Mode

129

In the Compare mode, the display of the images in the channel to be
compared to (Another CH) is delayed by one frame.

As an exception to this, when the input channel is set to Dual Link, the images
of the channel to be compared to (Another CH) are displayed with no delay.

However, the formats and phases of the two inputs (SDI A and SDI B) must
match.

Own H Mirror, Own V Mirror, Ano H Mirror and Ano V Mirror function is
expecting conditions listed above, In other conditions, it will be not warrant
that unit behave correctly.

CAUTION

When Dual Link has been selected for the input channel, the channel to be
compared to (Another CH) is always SDI B.

CAUTION

The Phase Compare mode and COMPARE1-5 modes do not support Dual
Link inputs. The display of the images, waveforms and vectors in these modes
is processed using Single Link.

CAUTION

NOTE

When monitoring stereoscopic images, connect the image to be viewed by the
right eye to SDI_A1/2 and the image to be viewed by the left eye to SDI_B1/2.

«
...
139
140
141
142
143
...
»

Содержание WM-3209































































































































































































































































Отзывы:

Нет отзывов